Pony Hooves Mitt Mod
Modification to" Wearable Pony Hooves" Made by Garuda Workshop. Adds a shackle so the hooves can be fixed into the hands. The wearer cannot easily put them on or remove them without help.
Get the Hoof model here:
https://garudaworkshop.gumroad.com/l/AYsRY
Consider donating to Garuda Workshop for the awesome hoof model!
Parts to buy:
Four: 3m screw that are 15mm long
Four: 3m nuts.
Directions:
This model is for the right hand, mirror when printing for the left hand. Scale the hoof to fit your hand and scale the shackle the same amount.
Glue the base onto the hoof. This will cover the sewing holes.
Glue on the shackle half that sits away from the thumb. It will be easier to put that way.
Used a 1/8in drill bit to clean up the screw holes
Little glue to help keep the nut in place will help.
You can also download it here:
Three STLs that you will print and glue onto the hooves.